Guide

Revoke connectors when idle

When you are not actively running an agent session, revoke or disconnect spend and trading connectors so a stale grant cannot place while you are away. Pair it with empty the sleeve overnight and rotate before you raise the balance.

By Agent Lane Editorial · Page dated 27 September 2026

Answer first

When a live agent spend or trading session ends — or before overnight, travel, or a long idle — run revoke connectors when idle: revoke or disconnect brokerage, payment, and payer MCP connectors so a stale grant cannot place, pay, or sign while you are away. Empty or park the sleeve too. When you return, rotate if needed, reconnect one connector at a time, and fund only the session ceiling. Agent Lane publishes the checklist. We do not place trades, hold wallets, or run your agents.

What this page is

A short operator guide for the idle-grant habit on the shield — close spend connectors when you are not at the desk, even when nothing failed. Before travel or extended offline, run the full kill switch before travel composite. Pair it with empty the sleeve overnight, rotate before you raise the balance, revoke before you debug, session time-box, connect only what you need, one connector at a time, review before place, receipt log after the session, dedicated agent wallet, and the shared-box checklist.

We are a publisher, not a trading desk. Product screens change; confirm connector and grant labels on the official page. We do not invent product revoke menus or click-paths.

Why a live grant while idle is the failure mode

• Review only works while someone watches. A leftover MCP connector or OAuth grant can still place on a retry, scheduled job, or shared-box handoff while you sleep or travel.
• Empty sleeve without disconnect is incomplete. Cash park cuts balance risk; a live grant still leaves a pipe that can spend if cash returns or another path funds the sleeve.
• “I’ll jump back in tomorrow” with connectors still on. Stale grants across a long idle are not a clean bill of health — close them when the session ends.

What “revoke connectors when idle” means

• Session ends → disconnect spend rails. Brokerage, payment, and payer MCP tools off Cursor and Grok so place, pay, and sign cannot run unattended.
• Revoke the grant, not just the chat tab. OAuth, login, or API sessions that lived beside those connectors — use the official product settings you already use for that account.
• Cash park too. Empty the sleeve overnight so surplus is not sitting beside tools.
• Lock the box. Lock or sign out of agent apps on that computer — especially on a shared box.
• Return with rotate → one connector → ceiling. After long idle: rotate before you raise, then reopen carefully.

Where it sits in the shield stack

1. Dedicated agent wallet — money the bot can reach; long-term holdings stay outside.
2. Spend caps + fund the session ceiling — bound and fund only this run.
3. Connect only what you need — minimum live tool set while you work.
4. Review before place / session time-box — human gate and hard end while you watch.
5. Revoke connectors when idle — close spend grants when the session ends or idle begins.
6. Empty the sleeve overnight — park cash beside that closed pipe.
7. Rotate before you raise the balance — credential re-verify before more cash when you return.
8. Revoke before you debug — full kill order if something already misfired.

Healthy end-of-session uses disconnect + empty. Skip disconnect and overnight cash park still faces a live grant.

How to revoke connectors when idle

1. End the live session deliberately. Stop placing, paying, or signing. Honor the session time-box if you set one. Do not leave a half-finished live prompt with spend tools still enabled.
2. Write the receipt log. If the run was intentional, write amount, destination, asset, venue, connector, and time — see receipt log after the session. Prefer confirm fills in the broker, not chat before you trust the transcript.
3. Empty or park the sleeve. Move leftover funds off the dedicated spend wallet or Agentic sleeve — or empty it — empty the sleeve overnight.
4. Revoke or disconnect spend connectors. Disable or remove brokerage, payment, and payer MCP connectors from Cursor and Grok. Revoke OAuth or login grants that lived beside them using the official product settings you already use — do not invent a product screen. Secrets stay out of chat — never paste API keys in chat.
5. Lock agent apps on that computer. Lock or sign out so a shared user or open window cannot re-enable tools. Shared computer: shared-box; keep agent browsing in a separate browser profile.
6. Return order before the next live run. After idle: rotate before you raise the balance if the pause was long, shared, or suspicious; reconnect one connector at a time; fund only the session ceiling; keep review before place on. Prefer paper before live if the path changed. If something misfired while you were away: revoke before you debug — disconnect → lock → empty → revoke/rotate — then dig.

Practical checklist

• End-of-session order. Stop live places → receipt log → empty sleeve → revoke/disconnect spend connectors → lock apps.
• Idle ≠ open pipe. Overnight, travel, and long pause all count — close grants even when nothing failed.
• Cash + grant. Empty without disconnect (or disconnect without empty) is half the habit.
• Return order. Rotate if needed → one connector → fund ceiling → review on.
• Shared-box pass. Connectors and open sessions on a shared computer — see shared-box.

Brokerage path: Shield brokerage spend. On-chain pay: Shield crypto spend and x402 buyer basics.

What Agent Lane does not do here

• We do not place trades, preview your orders, or babysit your agents.
• We do not hold your funds, run a hot wallet, or settle payments.
• We do not invent connector revoke UIs, OAuth screens, or API revoke calls for readers.
• We do not publish “leave connectors on overnight so you can jump back in” as a workflow.

Related guides

• Flatten all before connector revoke
• One order per idea until fill
• No place while unconfirmed fill
• Write max loss before entry
• Kill switch before travel
• Two-person rule for large places
• Log session end checklist
• Separate funding from trading wallet
• Name the strategy before connect
• Cap daily loss before session
• Empty the sleeve overnight
• Rotate before you raise the balance
• Revoke before you debug
• Session time-box
• Connect only what you need
• One connector at a time
• Fund the session ceiling
• Review before place
• Receipt log after the session
• Confirm fills in the broker, not chat
• Never paste API keys in chat
• Dedicated agent wallet
• Agent spend caps
• Paper before live
• Separate browser profile for the agent
• Write invalidation before entry
• Reject duplicate place same thesis
• Confirm symbol before place
• No scale-in without GO
• Flatten all before connector revoke
• One order per idea until fill
• No place while unconfirmed fill
• Shared-box and connector checklist
• Shield brokerage spend
• Shield crypto spend
• x402 buyer basics
• Whitelist merchants only
• More on Resources

FAQ

What does revoke connectors when idle mean?

It means: when you are not actively running an agent spend or trading session, revoke or disconnect brokerage, payment, and payer MCP connectors so a stale grant cannot place, pay, or sign while you are away. Pair with empty the sleeve overnight for cash park and rotate before you raise the balance before you reconnect and fund.

How is this different from revoke before you debug?

Revoke before you debug is the incident kill order after something misfires. Revoke connectors when idle is the routine habit when the session ends or you leave the desk — close spend grants before overnight, travel, or a long pause even when nothing failed.

How is this different from empty the sleeve overnight?

Empty the sleeve overnight parks spendable cash. Revoke connectors when idle closes the grant and tool path. Cash park without disconnect still leaves a live pipe; disconnect without empty still leaves balance tools could reach if something reconnects. Use both.

Why is a live grant while idle the failure mode?

Review before place only works while someone watches. A stale OAuth grant, leftover MCP connector, or open session can still place on a retry, scheduled job, shared-box handoff, or prompt that fires while you sleep or travel.

Do I invent a product revoke screen?

No. Use the connector, MCP, OAuth, or account settings the official product already exposes for that grant. Agent Lane does not invent product menus, click-paths, or API revoke calls.

When I come back, what is the return order?

Rotate credentials if the idle was long, shared, or suspicious; reconnect one connector at a time; fund only the session ceiling; keep review before place on. Prefer paper before live if the path changed.

Where do I apply this next?

Cash park: empty the sleeve overnight. Credential pass before more cash: rotate before you raise the balance. Incident: revoke before you debug. Least privilege: connect only what you need. Reconnect: one connector at a time. Clock: session time-box. Agent Lane publishes the checklist; we do not place trades or hold wallets.

Next steps

Before an agent touches real money, lock down a shared computer, set hard spend caps, and keep agent memory clean. Or browse all Agent Lane guides.